Xiaomi Mijia Tool Set

Xiaomi Mijia Tool Kit | MJGJX001QW | EAN: 6932554480028 | Electric Straight Screwdriver: 4 N·m Electric / 8 N·m Manual · 2,000mAh · Type-C · ~600 Screws · LED · Forward/Reverse · 22 S2 Steel Bits + Flexible Shaft + Extension Rod | Forged Steel Claw Hammer + Rubber Cover | Adjustable Wrench 25mm / 230 N·m | Multi-Purpose Needle-Nose Pliers | 3m Self-Locking Tape Measure + Bubble Level | Allen Key Set 8 Sizes (1.5–8mm) | Carbide Utility Knife 8-Segment | Clamshell Hard Case 297×230×70mm | 2.46kg | 2-Year Warranty

The Xiaomi Mijia Tool Kit (MJGJX001QW) is a 12-piece electric and manual home tool kit packaged in a clamshell hard case — covering the full range of everyday household drilling, driving, hammering, wrenching, wire work, measuring, fastener assembly and cutting tasks from a single organised storage unit at 2.46kg total weight. The kit combines an electric straight screwdriver with a 22-bit S2 steel set, flexible shaft and extension rod with a complete selection of hand tools — claw hammer, adjustable wrench, needle-nose pliers, 3m tape measure, 8-piece Allen key set and a carbide utility knife — all fitting into dedicated fixed slots and flexible clasps inside the clamshell case with a separate 185×43×29mm internal tray for screws, nails and small parts.

The electric straight screwdriver is the centrepiece of the kit. It operates on an all-metal planetary gearbox in two modes. In electric mode: 4 N·m maximum torque across 3 selectable torque settings, powered by a 2,000mAh battery charged via Type-C at 5V⎓1A in approximately 3 hours; the battery provides approximately 600 3mm×10mm self-tapping screws per full charge. LED work light. Forward and reverse buttons for one-touch direction switching. Magnetic bit holder accepts C6.3 standard bits, with the integrated magnet holding bits securely in place without a collar or sleeve. In manual mode: when the battery is depleted or a lower-RPM higher-torque approach is preferred, the straight screwdriver switches to manual gearbox mode — holding the handle and rotating left/right engages the all-metal planetary gearbox, which multiplies hand torque to 8 N·m (double the electric mode maximum) for use as a conventional manual screwdriver. This dual-mode design means the electric screwdriver remains fully functional as a manual tool after battery depletion without the need to locate a separate screwdriver. The 22 included bits (4× long 50mm bits and 18× short 25mm bits) are manufactured from S2 steel — a hardened tool steel with superior hardness and toughness relative to standard chrome vanadium bits, with precise fit to reduce cam-out on Phillips and Pozidriv heads. The universal flexible shaft adds reach into tight corners and awkward angles; the 60mm magnetic extension rod adds depth reach for recessed fasteners.

The claw hammer is forged from high-quality steel with a chrome rust-resistant finish, rubber-coated shock-absorbing anti-slip handle and a V-shaped claw for nail extraction. The included rubber hammer cover fits over the head for furniture assembly where a bare steel face would damage surfaces. The hook on the handle enables hanging storage outside the case. The adjustable wrench is high-strength chrome-plated steel with a 25mm maximum jaw opening and 230 N·m maximum torque, covering the full range of standard household bolt and nut sizes. The multi-purpose needle-nose pliers handle wire stripping (wire stripping slot), wire gripping (gripping slot), terminal crimping (crimping slot) and cutting in a single tool, with rubber-coated handles and a loaded spring for automatic rebound that eliminates the need to reopen the pliers by hand between operations. The 3m self-locking tape measure has a nylon-coated wear-resistant blade that locks automatically when pulled and releases with a light press, with an integrated bubble level for horizontal alignment and a movable hook that enables accurate zero-point correction for both inner (hook inner edge) and outer (hook outer edge) measurements. The Allen key set covers 8 sizes from 1.5mm to 8mm with a 25° ball-end design that allows driving at angles up to 25° from the fastener axis — the feature that allows hex socket screws to be driven without direct axial alignment, useful for furniture with limited tool-entry clearance. The utility knife uses carbide-treated blades in an 8-segment design (108.4×18×0.5mm per segment) with a push-and-twist auto-lock mechanism, tail cap for blade snapping, and an integrated string-cutting groove on the body for cord and string cutting without blade extension. Clamshell hard case 297×230×70mm. Total weight 2.46kg. 2-year warranty.